Pro-Ject Debut Pro Balanced Pick It Pro B Satin.
Key Features:
- The first True Balanced MM cartridge of its kind;
- Output voltage at 1 kHz: 4 mV;
- Frequency response: 20 - 20 000 Hz;
- Stylus type: Elliptical;
- Recommended load capacitance: 150-300pF;
- Recommended load resistance: 47kOhm;
- The nickel finish of the aluminium components results in a hard, resistant surface;
- Hybrid Tonearm - Carbon Aluminium Sandwich;
- VTA & Azimuth - Fully adjustable;
- 33/45/78 RPM;
- Special Platter. TPE damped & anti magnetic;
- Metal Feet. Damped & height adjustable.
True Balanced Ready
Balanced audio connections are standard among professional musicians, recording studios, and live concerts. It is essential to have a stable & interference-free connection as these signals, The significant advantage of a balanced connection is its ability to remove picked up noise and interferences. The Debut PRO B comes with our balanced MM cartridge - the Pick it Pro Balanced - and a balanced mini XLR phono output.
Cartridges are balanced signal transducers by nature! Due to the internal wiring of typical MM cartridges, until now, you needed to upgrade your turntable with an MC cartridge. But not with the new Pick it Pro Balanced! Our special Pick it PRO Balanced has been modified to access the entirety of that balanced signal.
Together with our separately available True Balanced Connection cables and true balanced phono stages - for example the Phono Box S3 B or DS3 B - you'll be able to access high-end features that were previously only available on the most expensive of turntable setups.
A milestone for the next decades
The Debut PRO B brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound. The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO B to its modern simple, elegant and unprecedented design. The nickel finish of all these aluminium components result in a hard, resistant surface. This process enables us to produce very high-quality and sustainable components and avoid plastics and similar materials that continue to age over time and would more importantly also degrade sound quality.
Hybrid Tonearm
The new Debut PRO B features a one-piece carbon-aluminium sandwich tonearm. The carbon layer gives the tonearm a high degree of rigidity, while the inner aluminium tube takes over the damping of the tonearm. This makes the tonearm perfect to be upgraded with higher-end MC cartridges!
The tonearm bearing is a completely new design. Precision CNC'd out of a single block of aluminium, you can see all the production stages above. The last step is putting a nickel finish on it. This will increase the rigidity of the bearing, ensuring free and fluid movement of the tonearm and precise tracking without material degration in looks or function.
Azimuth & VTA Adjustment
The newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.
Deeply driven
The electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.
Balanced connection
The big advantage of a balanced connection is its ability to remove picked up noise and interferences. Our „True Balanced“ cable range offers you the perfect cable to connect your turntable to either the Phono Box S3 B or Phono Box DS3 B.
A new platter – a deeper dish
The new Debut PRO B platter is a first on any Pro-Ject turntable. It features a notch for the record label and together with our Record Puck PRO (available separately) the puck's weight will press your record tightly against the platter. The die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing MC cartridges to work properly. Delve deep into the vast upgrade path the Debut PRO B has to offer!
The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. Our seperately available Record Puck PRO provides an extra level of damping and stability, so it is the perfect add-on for the Debut PRO B.
Pick it PRO Balanced
New Pick it PRO Balanced delivers the same lively and robust sound and is now also ready to be used in our True Balanced Connection. In that sense, it is the first MM cartridge of its kind! The perfect combination of components is the key to achieve the great charismatic sound of the Pick it PRO.
The first of its kind. The new Pick it PRO Balanced cartridge is a revised version of the Pick it PRO which allows you a „True Balanced“ signal transmission.
Made in Europe
We have always been looking for the best price/performance ratio, with perfect manufacturing quality and „Made in Europe“. For this reason, we decided to work with Ortofon to develop a unique range of cartridges. Thanks to the excellent manufacturing skills of Ortofon we were able to produce a very special cartridge: The Pick it PRO.
In the Box:
- Turntable;
- Power Supply;
- Dust Cover;
- 78 RPM round belt;
- 7‘‘ single adapter;
- User manual.
