Softears S01 - Compact Audio for Everyday Listening
The Softears S01 keeps wired listening simple without adding bulk to your daily setup. This portable USB DAC and headphone amplifier connects a compatible USB-C device to earphones, headphones or powered speakers with a 3.5mm analogue input. Its compact construction makes it a practical companion for music, video playback and calls, especially when your phone or tablet has no dedicated headphone socket. At approximately 4.3g and just 9.8cm long, it fits easily alongside your earphones in a pocket or carrying case.
High-Resolution Playback in a Small Package

Built around the CS46L41 audio chip, the S01 converts digital audio into an analogue signal for your wired headphones. It supports PCM playback at resolutions up to 32-bit/384kHz, accommodating both everyday streaming and compatible high-resolution music files. DSD playback is not supported.
The specified frequency response extends from 20Hz to 20kHz. Softears also lists a dynamic range of 118dB and a signal-to-noise ratio of 121dB, with the latter measured at 1kHz and 0dBFS. These figures reflect the design’s focus on low background noise and the preservation of quieter musical information. Actual playback resolution depends on the source device, software and audio file.
Designed for Compatible Wired Headphones

The S01 is specified for earphones and headphones with an impedance of 8–100Ω. This makes it suitable for a range of portable listening products, while achievable volume also depends on headphone sensitivity. Its conventional 3.5mm output provides a straightforward connection without requiring a balanced headphone cable.
Total harmonic distortion plus noise is specified at −98dB, and crosstalk at −54dB, both measured at 1kHz and 0dBFS. Together with its noise and dynamic-range specifications, these measurements describe an adapter designed to deliver clean everyday playback in a particularly compact format.
Microphone and Inline-Control Support
The S01 supports audio input as well as headphone playback. Its analogue-to-digital conversion capability allows a compatible headset microphone to work through the USB connection, making the adapter useful for calls, online meetings and voice chat. Compatible inline controls are supported too, so a suitable headset can retain convenient access to everyday functions.
A microphone and controls must already be present on the connected headset cable; the S01 does not add them to ordinary headphones. Available functions depend on the headset wiring, connected device and application.
Flexible Construction for Daily Use

A flexible link between your USB-C device and the headphones you already enjoy, the S01 combines an EnduraFlex silicone inner layer with a braided outer covering. This construction is designed to accommodate repeated bending while helping the short cable resist twisting and everyday wear. It remains easy to pack without the bulk of a separate amplifier enclosure.
The integrated injection-moulded housings use a non-metallic exterior, reducing the risk of scratching earphones stored alongside the adapter. The emphasis is on practical portability: a lightweight body, flexible cable and compact connectors that fit naturally into a mobile listening setup.
Driver-Free Connection Across Platforms

Softears lists support for Android, iOS, macOS and Windows without additional driver installation. With a compatible USB-C audio host, the S01 provides a simple way to use the same wired earphones across a phone, tablet and computer. Direct connection requires a suitable USB-C port; devices with other connector types may need a compatible adapter.
Powered through the USB connection, the S01 has no separate battery to recharge. Connect it to your device, insert your headphones into the 3.5mm socket and select it as the audio output where required.
In the box:
- Softears S01 portable USB DAC/headphone amplifier,
- user manual.

























